About Orkideh FAQ Contact Us

Orkideh

Silicone top coat (up to 600°C)

Color: Silver, other color on request (with resist temperature between 450-500°C)
Finish: Gloss, semi-gloss
Product description:This coverage is used as the first layer in coverage systems of heat resistance for protective from material surfaces, industrial installation and stoves metal structure that it exposed of heat up to 600 °C.

Technical data:
Description: It is a heat resistant silicone coating & weathering resistant. Resist temperatures
up to 650°C can be applied on steel and primers
Area of application: These paints can be used for blast furnaces, steel chimneys, car mufflers or other
units exposed to heat
Physical constants:  
Color: Silver, other color on request (with resist temperature between 450-500°C)
Finish: Gloss, semi-gloss
Viscosity: 15-24 DIN cup 4/25°C
Specific gravity: 1.01-1.05 gr/100cc
Solid: 41
Covering capacity: 15-20 M2/Lit
Drying time: Tack-free at room temperature 40 min
Stoving: 1 hours 200 °C
Shelf time: 12 months in cool and dry place
Application details:  
Method of application: conventional spray or brush
Thinning: Thinner TC-9918
Air Spray: Spray Nozzle orifice 1.2-2 mm
Nozzle pressure 3-5 Bar
Film thickness: Dry 15-20 microns
Wet 25-30 microns
Surface Preparation: Surface should be dry & free from dust

Zinc rich silicone primer

Color: Gray
Finish: Flat
Product description: : It has excellent resistance and adhesion with heat resistance up to 420°C it can use for painting of exhaust pipes, chimney, stove, oven industrial and hot water with special of corrosion resistance

Technical data:
Description: It is two pack silicone primer, excellent chemical and water resistance, excellent
corrosion resistance resist temperature up to 420°C can be applied on steel
Area of application: These paints can be used for blast furnaces, steel chimneys, car mufflers or
other units exposed to heat
Physical constants:  
Color: Gray
Finish: flat
Viscosity: A: 31-35 sec with cup 4
Specific gravity: A: 1.03±0.05 gr/100cc
B: 7.1± 0.1 gr/100cc
Solid: 76±2
Covering capacity: 13 M2/Lit (at 40-50 mic DFT)
Drying time: 5-10 min
Stoving: 1 hours 200°C
Shelf life: 12 months in cool and dry place
Pot life: 8 hours at 25 °C
Application details:  
Mixing ratio: component A refer to can label/ component B (Zinc dust) refer to can label
Method of application: Brush, roller or spray
Thinning: Thinner TC-9918
Air Spray: Spray Nozzle orifice 1.2-2 mm
Nozzle pressure 4-6 Bar
Airless Spray: Nozzle orifice 0.38-0.53 mm
Nozzle pressure 120-150 Bar
Film thickness: Dry 40-50 microns
Wet 70-90 microns
Surface Preparation: Surface should be dry & free from dust